POC32 can use a soundcard and/or a small decoder for the serial port. Bitrates and messagetypes are recognized automatically.
POC32 может использовать звуковую карту или небольшой декодер подключенный к серийному порту. Скорость данных и тип сообщений определяется автоматически.
Best decoding results are reached by strong signals and it is strongly recommended using a baseband (==discriminator) output of the receiver.
Наилучший результат достигается при достаточно сильном сигнале. Строго рекомендуется использовать baseband выход приемника.
On some newer PCI motherboards it's not possible using the com-port decoder!
На некоторых материнских платах невозможно использование декодер на COM порту.
POC32 was developed with Mircosoft Visual C++ and Microsoft Foundation Classes.
By using a soundcard POC32 samples with 11.025kHz and 16-bit. For decoding the data a DPLL (Digital Phase Locked Loop) is used.
You can get a statistic about received POCSAG packets by selecting En-/Decoder/Properties/Statistic.
POC32 can print out the entries of the monitor window!
Transmitting POCSAG packets is only available using windows 95. Simply select En-/Decoder/Transmit to open the transmit dialog.
Передача POCSAG пакетов возможна только с операционной системой Windows 95. Для этого необходимо выбрать в меню En-/Decoder/Transmit.
You can get allready formatted data from POC32 you can copy all or some entries of the monitor window to the clipboard. To convert these entries into a table a tab-character is inserted between the columns.
All toolbars can be moved and repositioned everywhere. To do this click on an edge of a toolbar and drag it somewhere else while holding down your left mouse key.
Most problems with POC32 are caused by people who haven't read all the documentation!
В основном проблемы с программой возникают у тех кто не прочитал документацию!